DIY: How to make a superhero cape tutorial

This is my first Pinterest project.  I decided to make a superhero cape for my 2 year old son.  Since he is really into cats I decided to make it a cat theme.  Just a note I still consider myself a beginner sewer but bear with me!

Supplies: 

1 yard of solid color fabric

1 yard of print fabric

optional - fat quarter

black thread

white thread

pins

scissors

Iron out both pieces of fabric and then fold in half.

The neckline: 
Then take the edge opposite the fold and fold it  until there are about 5 inches on the top

Cut  off the folded edge as seen below.  You can do this free handed.
Why am I using a piece of plywood to cut my fabric?  A certain someone (who shall not be named) thought I would ruin the cutting mat  by getting little pieces of fabric stuck in the mat while I cut the fabric.  The plywood got the job done.

I needed a round edge for the neckline so I grabbed my extra large mixing bowl from Ikea which worked perfectly. This allowed me to draw and cut a slight curve line from the cut edge to the folded piece.

Cape ties
  Take the triangular scraps that you cut off in the first step and make a total of 4 straps that are 16 inches long by about 2 1/2 inches wide.  Take one of the printed pieces and one of the solid pieces and put together inside out.  Pin.

Sew along both long sides and one of the short sides.  I cut the extra fabric along the corners so it was easier to turn inside out. When finished turn both ties right side out.

Assembly:
  Now place the right side of each piece of fabric toward each other.  Sandwich the cape tie between these two pieces leaving about a half an inch hanging out.  

Now the fun part!  Sew the cape together.  I started with a basic straight stitch but I didn't think it was going to be strong enough so I went through and did a zig zag stitch.  I left about 5 inches along the top open so I could put the cape right side out. Don't forget to trim the edges!

Cape decor: 
I didn't include this in the instructions because I would do it differently the next time I make one. But for this one I wanted an S emblem so I printed out a very large S in Arial font about size 500.  I very carefully traced the S onto a piece of fabric and cut.  It didn't have to be perfect since I was going to attach the S with a zig zag stitch.    For the cat I searched for a cat silhouette via the web and enlarged it.  For the circles I got out my trusty Ikea bowls and traced.


If I were to do it again I would definitely skip the sewing and do some sort of iron on.  

Special thanks to these blogs for inspiration and helping to get me started
http://thepleatedpoppy.com/2008/01/cape-tutorial/
http://www.georgialeigh.com/?p=57
http://www.allfortheboys.com/home/2012/1/2/diy-cape-christie-at-storehouse-crafts.html/
http://www.comeonilene.com/2011/06/20/reversible-superhero-cape/

Linked up to :

Warm Days of March

Here are some fun photos from March (even though it may look like they were taken in June)

Oh boy! I found my blue chair!

Oh a camera. Cheese...Cheese...Cheese

 What is that bright thing in the sky?

What is that big black thing you are sticking in my face?

OH! It is a camera, that is so funny.

Take a picture of me and Gorgy , Cheese

 Orgy look at the camera

Look what a good brother I am, I will hold your hand.

 I love Gorgy, she needs a hug.  No hug is complete with out sound effects....awwww.

Oh yea, mom is still taking pictures....cheese!

Take a picture of Moa (Sam's name for Mona)

Take a picture of the sprinkler, mama

 I love my blue chair, take more pictures mama (yes, he was REALLY into my taking pictures of him today)

 This picture taking is tiring

 Look I have my elephant

Why are you STILL taking pictures?

Look Mama, I can draw while sitting in my blue chair.

Yummy binki!

Ohh...I see a bubble.

 There is another bubble

 Mama take a picture of me sitting in my blue chair and the bubble machine.

Things to do with Kids Around Madison this Weekend

Saturday March 10th

University of Wisconsin Space Place Saturday Science Workshop
          Where: 2300 S. Park Street , Madison, WI
           When: 10-11am
For ages 6-10 years old, this week's theme is Chemistry Fun.  Free, but limited to the first 50 people.

Donuts with Dad

             Where: Ashman branch library

              When: 10-11am

Snacks, movies, stories, and fun with Dad!

Saturday Stories and Sweets

          Where: Lakeview branch library
             When: 10:30-11:15am
Donuts, juice, and storytime
 

Kids in the Rotunda:

         Where: Overture Center for the Arts, 201 State Street Madison, WI 53703
          When: 3 shows at 9:30 AM, 11 AM and 1 PM
This week is Tom Pease with his songs and storytelling

Wildlife Baby Shower
         Where: Dane County Humane Society's Four Lake Wildlife Center, 5132 Voges Road, Madison
         When: 12:30-4pm
 The Dane County Wildlife Center is holding a baby shower for the orphaned wildlife that comes through their doors this time of year.  They have a baby registry on their website or at Target.   Entertainment includes balloon sculpting, a reptile program, a clown, and a juggling show.

Crawlers, Flyers, Hoppers and Skimmers

             Where:Hawthorne branch library
             When: 1:30-2:30 pm 

UW Entomology Dept shows off a variety of insects.  An interactive program for all ages.

Sunday March 11th


UW-Madison Arboretum:  Arboretum Family Walk: “Mud”
       Where: 1207 Seminole Hwy Madison, WI 53711
       When: 1:30-2:30
Take a walk at the arboretum and learn about animal tracks

How to Build a Cat Tree

**I originally posted this article over at PitelSpot in Feb '09 as a guest.  But I am reposting it here so that I can answer any questions people may have.  I have also edited a little.**

While in Oklahoma, Oscar had a small cat tree where he spent a large portion of his time. So much time in fact, that the structural integrity was destroyed by his constant jumping, bouncing, and swinging.

Our first attempt to replace the cat tree with a hardier, taller model proved to be out of our price range, with models starting at $250 going upwards of $500. So Nathan made me a deal. He would build a cat tree/condo when he got his workshop up and running and was able to buy a table saw. So 2 ½ years later, here’s the process:

The Design:

I started by browsing through websites that sell cat trees and condos. From these designs, we came up with several key elements that the tree should include:

1. Height. An interior decorator had recently helped us finish off our family room. On the left side of the mantle she had place a 7 foot high silk plant. To maintain balance in the room, we decided to build a 7 foot cat tree on the right side of the mantle.  This created a triangle affect on the wall.  
2. Tail Chasing. Oscar loves to chase his own tail by hanging off ledges. So several ledges needed to be included.
3. Hiding. Like most cats, Oscar likes to fit into small places, where he feels safe and warm. When he is a little unsure of things, he likes to climb to a spot as high as possible, allowing him to keep an eye on things. Right now, that spot is the cabinets above the fridge. We would like to go back to that point of blissful ignorance when he doesn’t walk around on the kitchen counters.

Materials:

After several trips to Menards for ideas, we came up with the following list of materials:

• 12 inch concrete form
• 3 2 foot x 6 foot 3/4inch plywood boards
• 16 ½ feet of junk 2x4s (already had from previous homeowners)
• 16 ½ feet of 8 inch PVC pipes
• 4 packages of sisal rope
• 60 feet of carpet (from remnant carpet section)
• 5 Long lag bolts (with end cut off to make double ended screws)
• 6 Lag bolts with large torx head
• 1 foot of fabric for cat hammock
• Lots of glue sticks and staples

The Build:

Nathan did most of this section.

1. Columns: Nathan cut the PVC pipe into 4 sizes: 3 – 2 feet, 2 – 2.5 feet, 1 – 3.5 feet, 2 – 1 foot. He then fitted the 2×4 pieces inside the PVC pipes and screwed them in. Then he drilled holes for the bolts. I wrapped each pole with either carpet or sisal rope which was attached with high temperature glue.

2. Platforms: Nathan cut the platforms into several shapes. Base platform – 2 ftx2 ft. Level 1 – 2 ft x 2 ft with one corner cut off. Level 2 and Level 3 – 2 ft x 1 ft. Level 4 – 1 ft x 1ft. Level 4 was originally going to be a concrete form cut in half and placed on the side like a half moon shape but due to stability issues this top level was transformed into a platform. Nathan predrilled holes into the boards.

3. Concrete form: Nathan used a protractor to trace a circle on the outside of the form. He also traced and cut two more circles out of wood to wedge into the top and bottom of the form. The inside floor and the outside of the form were covered in carpet.

Finished Product:

Oscar LOVES his new cat tree. He spends a great deal of time chasing his tail on the ledges. He sleeps inside the concrete form and play with the toys hanging off the ledges.

ETA: It is now 3 years later and the cat tree is holding up well.   Oscar now has a buddy (Calvin Coolidge) and the  two of them can often be found batting at each other in play on the cat tree.  My son also likes to hide things in the little cubby hole.